![]() If you are not hearing and feeling a difference, you may need to open the mechanism back up and try retentioning the spring again. You should notice that it is making a crisp click sound when pressed, and that it now springs back with more force than it did before. At this point, before reassembling the mouse, set it down on the table, and give the tiny white button a few test clicks. Doing it this way will insure that the tiny white button stays in place while the mechanism is put back together. ![]() With the other hand, pick up the mouse body, turn it upside down, and push the cover back into place. With one hand, pick up the cover while keeping it upside down so the button stays in place. The easiest way to do this is by dropping or placing it into the cover with a pair of tweezers. First reinstall the tiny white button into the mechanism cover (you did remember to find and set aside the tiny button right?). Next, you will need to reassemble the click mechanism. I would advise that you read through some of the comments for various approaches to completing that part of the repair. Good luck with your repair, I hope this helps.ĮDIT: There are quite a few comments about the difficulty of step 8. I imagine at some point the piece causing the problem will break, at which time the mouse will need to be replaced (unless you're determined enough to try and source parts). Each time the repair lasts about 6 months to a year before needing to be redone. I have now performed this fix for the third time and decided to take pictures this time to share with others who may find this useful. There are some very small parts involved, so you will want to make sure you ware working in a well lit, clean environment so that any parts that are dropped can be easily found. Sure enough, It's a pretty simple fix, if you have some common tools and a teaspoon (edit:a tablespoon) of patience. So, being the tinkerer that I am, I decided to open her up and see if it could be repaired. As can be imagined, this gets frustrating very fast. I have a Logitech wireless laser mouse and after a year or so of use, the left click button would double click every time I tried to single click something.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |